grinding product line

Grinding product line consists ofmainframe, speed reducer, powder separator, blower, bag filter, pipes, cyclone,motor, etc. The peripheral equipment is jaw crusher, bucket elevator, feeder,hopper, electric control panel, etc. Break-day grinding Mill can grind allkinds of non-flammable and non-explosive minerals with Mohs hardness lowerthan 9 and humidity less than 6%,and is widely used in metallurgy, construction of buildingmaterials, chemical industry, mining industry, etc. Working Principle: Large materials are crushed by Jaw crusherto the needed sizes firstly, then the materials are elevated to storage hopperby bucket elevator, thirdly, the materials are fed into the grinding chamberfor grinding by vibrating feeder evenly and continuously. The powder aftergrinding goes upwards together with the airflow, after separated by powderseparator, the powder which can meet the fineness requirement enters into thecyclone powder collector through pipe together with the airflow, and then isdischarged from the discharge valve as final product. The airflow is suckedinto centrifugal blower through wind recycling pipe at the upper part ofcyclone powder collector. The mainframe is driven by the speed reducer throughthe central axis in the mill. The quincunx stand connects with the upper partof central axis, at the quincunx stand, rollers are set and by which thevibrating pivot formed. Below the quincunx stand and rollers is shovel system.Materials are fed into the space between turning rollers and shovels , and thenare grinded by the pressure produced by turing rollers, thus powder is made.